Woson TANDA - 3.5 Installation and Power Connection

Steam Sterilizer Operation Manual
TANDA Model REV-E Page of 43
12
3.3 Optional Accessories
Name
Model
QTY
Picture
USB Reader
1G
1
Thermal Printer
PINTER20 (SP-POS58VTH)
1
3.4 Installation Environment
The sterilizer should be set in a place which at least has 10cm distance against each side
(20cm to the top) as following:
❖ The sterilizer should be set in a place with good ventilation.
❖ The temperature of enviroment: 5-40℃
❖ The humidity of environment: ≤85%
❖ Atmosphere pressure: 860Hpa～1060Hpa
❖ An earth connection is essential.
CAUTION: Do not place any stuff which easily melts near the sterilizer.