CAUTION: Releasing pressure until the pressure down to the 0 kPa or P.
Do not put or cover any stuff on the machine to keep heat venting well.
6.8 End of the Sterilization Working Cycle
When working cycle finished, the “ED” will illuminate and give you a sound of alerting. Then
you can open the door and take the sterilized articles out.
WARNING: Do not try to open the door if the pressure does not show “0” kPa.
When the door opened, the sterilizer will return to the initial state, heat-preserving and waiting
for next sterilizing cycle. Before starting a new cycle, it will be kept in a heat-preserving
condition all the while.
CAUTION: After sterilizing has been finished, please use the removal tool to take the
trays out from sterilizing chamber. It will be better to store sterilized articles
after cooled down totally.
6.9 Power Off
If you finished the sterilization, please turn off the power switch. The power switch light will be
off, and close the door but do not lock it.
If do not use it for a long time or for storage, please unplug the power cord.
ATTENTION: During the sterilizing, we suggest that you use the indicator tape. Put them
in the chamber in order to ensure reliability of sterilization.
To Next Page
Loading...
