Woson TANDA - 6.8 Cycle End and 6.9 Power Off

Steam Sterilizer Operation Manual
TANDA Model REV-E Page of 43
27
Pre-vacuum: Display -P
Outputted the airs in the chamber, and inputted steam in the chamber, run 3 cycle times.
Heating: Display HE
Keep heating until getting the time of sterilization.
Sterilization: Display TIME
Display sterilizing time and temperature. The sterilizer keeps the temperature of sterilization
with time is counted down.
Vacuum drying: Display PL OR TIME
Display dry-vacuum time and the temperature. Draining used water and steam. Sterilizer will
automatically switch to vacuum drying process after the steam pressure drop and chamber
temperature down.
End: Display ED
The buzzer make a sound means the total sterilization processes have been finished, then
wait for the pressure down to “0” bar at the steam manometer on command front panel.
-P
86
2
0.2
95
PL
2.1
134
4
1.1
121
20
0.5
106
HE
-P
- - -
Po