Chapter 7 Essential Information
Please ensure the sterilizer operated correctly. It is very important to follow below points and
carry out the necessary maintenance procedures as specified.
7.1 Please Ensure the Following....
❖ You have read and follow these operating instructions.
❖ The load is suitable for sterilizing in the selected program.
❖ The load can be sterilized at the selected temperature.
❖ The load has been rinsed thoroughly in clean water before sterilization to avoid any
chemical residues left after cleaning contaminating the sterilizer.
❖ When placing instruments on trays, ensure that they are placed on the ribs of the tray (to
help drainage), they must not touch each other and must not interfere with other trays or
the chamber above.
❖ Only distilled water can be used.
❖ The sterilizer should be set in a ventilated area.
❖ The sterilizer is not installed in an enclosed cupboard space.
❖ Keep the door ajar if not in use.
❖ Only qualified personnel could do the service of sterilizer.
❖ Keep and reserve the package for transportation.
❖ If the place which you use the machine is over 500m height, it should be set before use.
You can contact with local dealer for the detail.
7.2 And Please Do Not....
❖ …lose this manual.
❖ …add any chemicals or whatsoever analogous water to the sterilizer.
❖ …attempt to sterilize volatile substances, toxic materials or other unsuitable loads. Refer
to your “Authorized Person” for advice.
❖ …place the sterilizer in direct sunlight.
To Next Page
Loading...
