Steam Sterilizer Operation Manual
TANDA Model REV-E Page of 43
Appendix 2 Error Code List
The sterilizer will show Error information when malfunctions happen.
Example
Error Code List
Steam generator over temperature
Heating ring over temperature
Fail to maintain temperature and pressure
Pressure cannot be exhausted
Door is open during cycle
In-chamber sensors temp. too high or too low (for dual sensors only)
Temp. and pressure doesn’t match
In-chamber sensors temp. differs too much (for dual sensors only)
Air pressure low (due to high altitude)
Pressure sensor output low
Pressure sensor output high
Out of power during cycle
To Next Page
Loading...
