Wow Snooper+ - Firmware Update

28
4.5 Firmwareupdate
ThermwareistheoperatingsystemoftheSnooper+device.Newrmwareisrequiredfromtimetotimeasthediagnosis
functionalityoftheWOW!softwaregetsenhanced.ThisismadeavailableonlineorbywayofaDVDupdateandmustbe
copied to the Snooper+ device following the software update.
Devices
Replacermware
DiagnosisBox
3
1
2
1. Select "Diagnosis Box"
1
in the "Devices"
2
index tab.
2. Click on "Replace rmware"
3
.
3. The update assistant will be launched.
The procedure is described in detail while the program-
ming is running.
Follow the instructions.
Note!
The update takes a while to complete. Please
notethatthepowersupplyoftheSnooper+
device must not drop below 12V.
Connecttoapowersourceifnecessary.