Xantrex XDC 10-1200 - Table C-1 IEEE 488.2 Commands

SCPI Command Reference
C–10 TM-XDOP-01XN
Table C-1 IEEE 488.2 Commands
Function SCPI Commands Description Query
Clear Status
*CLS
[:]STATus[<channel>]:CLEAr
Clears the status data structures. N/A
Standard Event
Status Enable Query
*ESE?
[:]STATus[<channel>]:STANdard:ENABle
Query the Standard Event Status
Enable register settings.
N/A
Standard Event
Status Enable
*ESE
[:]STATus[<channel>]:STANdard:ENABle <ESE-
word>
Set the Standard Event Status
Enable Register bits.
N/A
Standard Event
Status Register
Query
*ESR?
[:]STATus[<channel>]:STANDard[:EVENt]?
Query Standard Event Status
Register.
N/A
Identification Query
*IDN?
[:]SYSTem[<channel>]:IDENtify?
Query identification string.
(Manufacturer’s information.)
N/A
Individual Status
Query
*IST?
Reads the current state of the
IEEE 488.1 defined "ist" local
message in the device
N/A
Operation Complete
Command
*OPC
Causes the device to generate the
operation complete message in the
Standard Event Status register
when all pending selected device
operations have finished
N/A
Query Operation
Complete
Command
*OPC?
Place and ASCII character “1”
into the output queue when all
pending operations have been
finished. See IEEE 488.2-1992
section 12.5.3.
N/A
Option
Identification Query
*OPT?
[:]SYSTem[<channel>]:OPTIon
Identify reportable device options N/A
Parallel Poll Enable
Register Query
*PRE?
Query the Parallel Poll Enable
Register setting
N/A
Parallel Poll Enable
Register Command
*PRE <status-enable>
Sets the Parallel Poll Enable
Register bits. See IEEE 488.2
section 11.6 for details.
N/A
TM-XDOP-01XN.book Page 10 Monday, July 17, 2006 11:19 AM