Xantrex XDC 10-1200 - Table C-2 Readback Commands

SCPI Command Reference
C–12 TM-XDOP-01XN
Trigger
*TRG
Trigger commands. Analogous to
the IEEE 488.1 defined Group
Execute Trigger interface
message. See IEEE 488.2 section
6.1.4.2.5
N/A
Self-Test Query
*TST?
[:]SYSTem[<channel>]:TEST?
Internal self-test and responds
indicating whether or not the
device completed the self-test
without any detected errors.
N/A
Wait To Continue
*WAI
[:]SYSTem[<channel>]:WAIT
Prevents the device from
executing any further commands
or queries until the no-operation-
pending flag is TRUE.(*OPC?)
N/A
Table C-2 Readback Commands
Function SCPI Command Description Query
Read Output
Current
[:]MEASure[<channel>][:SCALar]:CURRent[:DC]?
Read output current N/A
Read Output Power
[:]MEASure[<channel>][:SCALar]:POWer[:DC]?
Read output power N/A
Read Output
Voltage
[:]MEASure[<channel>][:SCALar][:VOLTage][:DC]?
Read output voltage N/A
Table C-1 IEEE 488.2 Commands
Function SCPI Commands Description Query
TM-XDOP-01XN.book Page 12 Monday, July 17, 2006 11:19 AM