Xantrex XDC 10-1200 - Table C-13 Output State

SCPI Command Reference
C–28 TM-XDOP-01XN
Table C-13 Output State
Function SCPI Command Description Query
Set Output State
[:]OUTPut[<channel>][:STATe] <on-off-state>
Enable/disable the power supply
output.
Yes
Set Output State at
Power-On
[:]OUTPut[<channel>]:PON:STATe <on-off-state>
Selects the state of the output at
power-on
Yes
Power-On
Configuration
[:]OUTPut[<channel>]:PON:RECall
{LAST|PRESet|USER<setting_location>|SEQ<sequen
ce_number>}
Configure the supply to recall last
setting, one of the user settings,
factory preset values or to enable
an auto sequence.
Yes
TM-XDOP-01XN.book Page 28 Monday, July 17, 2006 11:19 AM