68 •Special features keys XEROX WIDE FORMAT COPY SYSTEM
choices are ALWAYS ON, ALWAYS OFF, and USE PROGRAM
SETTING. USE PROGRAM SETTING is the factory default setting.
CROSSFOLD OPTIONS
CROSSFOLD: USE PROGRAM
The TITLE BLOCK LOCATION option enables you to specify the location
of the title block for the copy jobs that are about to be run. The choices
are BOTTOM RIGHT, BOTTOM LEFT, TOP RIGHT, TOP LEFT, and
INTELLIGENT TITLE BLOCK. BOTTOM RIGHT is the factory default
setting.
INTELLIGENT TITLE BLOCK should be used if the title block is not
located in the desired location on the folded copy. This selection will use
information, document size, selected fold program, title block position
input to place the title block in a position based on the information. It may
not be the user's desired or location. Before making this selection, check
the following:
• Autorotate is selected.
• Document being scanned is oriented correctly for scanning.
• Ensure the title block position specified is correct.
• For additional help, refer to the Folding Supplement manual.
NOTE: The title block location may also be selected on the READY TO
COPY screen using the title block location icon. The title block location is
indicated by the dotted lines.
TITLE BLOCK LOCATION
TB LOCATION: BOTTOM RIGHT
TITLE BLOCK
LOCATION
To Next Page
Loading...
Need help?
General