Xerox B1025 User Manual

Symptom
Solutions
The output is too light.
• To check the toner level, check the control panel,
use the print driver, or access Xerox
®
CentreWare
®
Internet Services. If the toner
cartridge is almost empty, replace it.
• Verify that the toner cartridge is approved for use
in your printer, then replace the toner, as needed.
For best results, use a genuine Xerox
®
toner
cartridge.
• Ensure that the print-quality mode is not set to
Toner Saver. The Toner Saver setting is useful for
draft-quality output.
• Replace the paper with a recommended size and
type, then confirm that your printer and print
driver settings are correct.
• Verify that the paper is dry and that supported
paper is used. If not, change the paper.
• Change the Paper Type settings in the print driver.
In the print driver, open the Printing Preferences
menu, click the Paper/Output tab, then change
the Paper Type setting.
• If the printer is located in a high-altitude
environment, adjust the altitude setting of the
printer. For details, refer to the System
Administrator Guide at www.xerox.com/office/
B1022_B1025docs.
Toner smears or the print wipes off.
The output has stains on the back side.
• In the print driver, change the Paper Type
settings. In the print driver, open the Printing
Preferences menu, click the Paper/Output tab,
then change the Paper Type setting. For example,
change Plain to Lightweight Cardstock.
• Verify that the paper is the correct size, type, and
weight. If not, change the paper settings.
• Verify that the printer is plugged into an outlet
that provides the correct voltage and power. If
necessary, review with an electrician the electrical
specification of the printer.
• For details, refer to Electrical Specifications.
Random spots appear on the output, or the image is
blurry.
• Ensure that the toner cartridge is installed
correctly.
• Verify that the toner cartridge is approved for use
in the printer, then replace the cartridge, as
needed. For best results, use a genuine Xerox
®
toner cartridge.
• Use the Heavyweight or Cardstock paper type
setting, or use a paper type with a smoother
surface.
• Ensure that the humidity in the room is within
specifications. For details, refer to Relative
Humidity.
• For details, refer to Selecting a Location for the
Printer.
Xerox
®
B1025 Multifunction Printer
User Guide
153
Troubleshooting

Xerox B1025 Specifications

General

Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Booklet printing function	Yes
Print speed (black, normal quality, A4/US Letter)	25 ppm
Duplex print speed (black, normal quality, A4/US Letter)	13 ppm
PCL fonts	107
Printer fonts	PCL, PostScript
Digital sender	-
Maximum duty cycle	50000 pages per month
Recommended duty cycle	2000 - 50000 pages per month
Number of PostScript fonts	136
Page description languages	PCL 6, PostScript
Compatible memory cards	MicroSD (TransFlash)
Maximum internal memory	1536 MB
Sound pressure level (quiet mode)	30 dB
Wi-Fi	No
Security features	Firmware Verification, Security Certificate Management, Signed Certificate Creation, Audit Log
Cabling technology	10/100Base-T(X)
Security algorithms	AES, FIPS 140-2, SNMPv3, SSL/TLS
Ethernet LAN data rates	10, 100 Mbit/s
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
AC input voltage	110 - 127 V
AC input frequency	50 - 60 Hz
Power consumption (off)	2 W
Power consumption (sleep)	1.5 W
Power consumption (average operating)	650 W
Energy Star Typical Electricity Consumption (TEC)	1.65 kWh/week
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 30 °C
Operating relative humidity (H-H)	20 - 80 %
Package depth	750 mm
Package width	771 mm
Package height	600 mm
Package weight	32300 g
Scan to	E-mail, FTP, SMB, USB
Scan drivers	TWAIN, WIA
Input color depth	24 bit
Maximum scan area	297 x 432 mm
Scan speed (color)	30 ppm
Image formats supported	JPEG, TIFF
Document formats supported	PDF
Optical scanning resolution	600 x 600 DPI
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra
Other operating systems supported	Solaris 11
Mobile operating systems supported	Android
Server operating systems supported	Windows 2000 Server, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Copier resize	25 - 400 %
Time to first copy (black, normal)	7.6 s
Copy speed (black, normal quality, A4)	25 cpm
Modem speed	33.6 Kbit/s
Total input capacity	100 sheets
Total output capacity	250 sheets
Product color	Black, White
Market positioning	Business
Paper tray media types	Bond paper, Heavy paper, Letterhead, Lightweight paper, Plain paper, Pre-Printed, Recycled paper, Thin paper
ISO A-series sizes (A0...A9)	A3, A4, A5
Maximum ISO A-series paper size	A3

Weight and Dimensions

Depth	555.3 mm
Width	560 mm
Height	417 mm