Xerox B1025

Symptom
Solutions
The output is blank. Power off the printer, then power it on again.
If the error persists, contact your Xerox
®
representative.
Streaks appear in the output.
Order a new Drum Cartridge. To replace the Drum
Cartridge, follow the installation instructions that are
included with the new Drum Cartridge.
The output has a mottled appearance.
• Verify that the paper is the correct size, type, and
weight. If not, change the paper settings.
• Ensure that the humidity is within specifications.
For details, refer to Selecting a Location for the
Printer.
Ghosting appears in the printed output.
• Verify that the paper is the correct size, type, and
weight. If not, change the paper settings.
• In the print driver, change the Paper Type
settings. In the print driver, open the Printing
Preferences menu, click the Paper/Output tab,
then change the Paper Type setting.
•
Order a new Drum Cartridge. To replace the Drum
Cartridge, follow the installation instructions that
are included with the new Drum Cartridge.
Auger marks appear on the printed output.
• To check the toner level, check the printer control
panel, use the print driver, or access
Xerox
®
CentreWare
®
Internet Services. If the
toner cartridge is almost empty, replace it.
• Verify that the toner cartridge is approved for use
in your printer, then replace the cartridge, as
154
Xerox
®
B1025 Multifunction Printer
User Guide
Troubleshooting