Xerox Phaser 3260 User Manual

June 2014
2-11
Xerox® Phaser® 3052/3260 Service Manual
09-100 , 09-300
Status Indicator RAPs
09-100 Toner Cartridge Near End of Life Fault
The Toner Cartridge life is less than 10%.
BSD-Reference: None
Procedure
1. Check the remaining life of the Toner Cartridge by using one of the methods listed below:
• Print a Supplies Information Report. [GP 2]
• Open Easy Printer Manager, check Toner Life.
• Open the CWIS application. Select; [Status, Supplies, Print Cartridge].
NOTE: The workstation and printer machine must be networked to use the CWIS
application.
2. Check the remaining life of the Toner Cartridge.
3. If the Toner Cartridge has reached end of life, switch Off the power and replace the Toner
Cartridge.
09-300 Imaging Unit Near End of Life Fault
The Imaging Unit life is less than 10%.
BSD-Reference: None
Procedure
1. Check the remaining life of the Imaging Unit by using one of the methods listed below:
• Print a Supplies Information Report. [GP 2]
• Open Easy Printer Manager, select [Machine Settings, ]
• Open the CWIS application. Select; [Status, Supplies, Black Imaging Unit].
NOTE: The workstation and printer machine must be networked to use the CWIS
application.
2. Check the remaining life of the Imaging Unit.
3. If the Imaging Unit has reached end of life, switch Off the power and replace the Imaging
Unit.

Xerox Phaser 3260 Specifications

General

Print Technology	Laser
Print Speed	Up to 29 ppm
First Page Out	As fast as 8.5 seconds
Duplex Printing	Automatic
Monthly Duty Cycle	Up to 30, 000 pages
Output Capacity	150 sheets
Processor Speed	600 MHz
Memory	128 MB
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0
Input Capacity	250 sheets
Media Sizes Supported	A4, A5, A6, B5, Executive, Folio, Legal, Letter, Oficio
PDL	PCL 6, PCL 5e, PostScript 3