Using the Manual Feed Mode
Phaser® 3500 Laser Printer
17
Note
If you are using Windows 2000, Windows XP, or Windows Server 2003 you can view online
help about printing options and other features. Click the Help button on the Troubleshooting
tab.
Using the Manual Feed Mode
Follow these steps to print a manual print job from Tray 1 (MPT):
1. At your computer, select Print, select Properties or Preferences, select the Paper tab, select
the Force printing from specific tray, select Tray 1 [Manual Feed] from the Source
drop-down list, then click OK to send the job to the printer.
2. Open Tray 1 (MPT) by pushing the handle down and pulling out.
Windows 98 or
Windows Me
Paper tab Paper Size
Layout
Orientation
Paper Source
Copies
More Paper Options dialog
box
Printing on Both Sides (Duplex
Printing)
1
Graphics tab Resolution
Halftoning
Special
Scaling
Device Options tab
Fit to Page
Paper Type
Print Quality
PostScript tab
PostScript Output Format
1 The Phaser 3500B and Phaser 3500N configurations may be upgraded to use these printing
options. Install an optional duplex unit.
PostScript Printer Driver Options for Windows Operating Systems (Continued)
Operating System PostScript Driver Tab Printing Options
To Next Page
Loading...
