Xerox Phaser 3500 - Transparencies; Printing Transparencies from Tray 1 (MPT)

Transparencies
Phaser® 3500 Laser Printer
23
Transparencies
Print transparencies from Tray 1 (MPT) only.
Guidelines
Place no more than 50 transparencies at one time in Tray 1 (MPT).
 Handle transparencies by the edges, using both hands to avoid fingerprints and creases
which can cause poor print quality.
 Use transparencies intended for monochrome laser printers.
Printing Transparencies from Tray 1 (MPT)
1. Fan the transparencies to release sheets that may stick together.
2. Insert the transparencies into Tray 1 (MPT). For information about how to load paper in
Tray 1 (MPT), see the Quick Reference Guide that came with your printer. The Quick
Reference Guide can also be found at www.xerox.com/office/3500support
.
3. On the printer’s control panel:
a. Press the Menu button, select Printer Setup, then press the OK button.
b. Press the OK button to select Paper Handling.
c. Select Tray 1 Size, then press the OK button.
d. Select Letter or A4, then press the OK button.
e. Press the Cancel button to return to the main menu.