Xerox Phaser 3500 - Printing Transparencies from Tray 2 or 3

Transparencies
Phaser® 3500 Laser Printer
24
4. On the printer’s control panel:
a. Press the Menu button, select Printer Setup, then press the OK button.
b. Press the OK button to select Paper Handling.
c. Select Tray 1 Type, then press the OK button.
d. Select Transparency, then press the OK button.
e. Press the Cancel button to return to the main menu.
5. In the printer driver, select Tray 1 as the paper source.