Xerox Phaser 6022 User Manual

Troubleshooting
104 Xerox
®
Phaser
®
6022 Printer
User Guide
Avoid the following:
• Polyester coated paper that is specially designed for inkjet printers.
• Paper that is folded, wrinkled, or excessively curled.
• Loading more than one type, size, or weight of paper in a tray at the same time.
• Overfilling the trays.
• Allowing the output tray to overfill.
For a detailed list of supported paper, go to www.xerox.com/paper.
Locating Paper Jams
WARNING: Never touch a labeled area on or near the heat roller in the fuser. You can get burned. If
a sheet of paper is wrapped around the heat roller, do not try to remove it immediately. Switch off
the printer immediately and wait 20 minutes for the fuser to cool. Try to remove the jam after the
printer has cooled. If the error persists, contact your Xerox representative.
CAUTION: Do not attempt to clear any paper jams using tools or instruments. This can permanently
damage the printer.
The following illustration shows where paper jams can occur along the paper path:
1. Output Tray
2. Transfer Belt
3. Release Levers
4. Rear Cover
5. Main Paper Tray with Jam Access Cover

Xerox Phaser 6022 Specifications

General

Max Print Resolution	1200 x 2400 dpi
Paper Capacity	150 sheets
Connectivity	USB 2.0, Ethernet, Wi-Fi
Processor Speed	525 MHz
Print Memory (Standard)	256 MB
Paper Output Capacity	100 sheets
Duplex Printing	Manual
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Print Technology	Laser
Print Speed	Up to 18 ppm
Media Sizes Supported	A4, A5, A6, B5
Monthly Duty Cycle	Up to 30, 000 pages