Xerox Phaser 6022 User Manual

Installation and Setup
Xerox
®
Phaser
®
6022 Printer 31
User Guide
Selecting a Location for the Printer
1. Select a dust-free area with temperatures from 10–32°C (50–90°F), and relative humidity 15–85%.
Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room can
cause condensation inside the printer, directly interfering with image transfer.
2. Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of the
printer. The printer must be horizontal with all four feet in solid contact with the surface. To find the
weight for your printer configuration, see Physical Specifications on page 119.
After positioning the printer, you are ready to connect it to the power source and computer or network.
See also:
Total Space Requirements on page 119
Clearance Requirements on page 119

Xerox Phaser 6022 Specifications

General

Max Print Resolution	1200 x 2400 dpi
Paper Capacity	150 sheets
Connectivity	USB 2.0, Ethernet, Wi-Fi
Processor Speed	525 MHz
Print Memory (Standard)	256 MB
Paper Output Capacity	100 sheets
Duplex Printing	Manual
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Print Technology	Laser
Print Speed	Up to 18 ppm
Media Sizes Supported	A4, A5, A6, B5
Monthly Duty Cycle	Up to 30, 000 pages