Specifications
Xerox
®
Phaser
®
6022 Printer 121
User Guide
Electrical Specifications
Power Supply Voltage and Frequency
Power Supply Voltage Power Supply Frequency
110–127 VAC +/-10%, (99–140 VAC) 50 Hz +/- 3 Hz
60 Hz +/- 3 Hz
220–240 VAC +/-10%, (198–264 VAC) 50 Hz +/- 3 Hz
60 Hz +/- 3 Hz
Power Consumption
Printer Mode Power Consumption
Power Saver Mode 1 (Low Power) 11 W or less
Power Saver Mode 2 (Sleep) 3 W or less
Ready/Standby 51 W
Continuous printing 320 W or less
This printer does not consume electric power when the power switch is turned off even if the printer is
connected to an AC outlet.
ENERGY STAR Qualified Product
The Xerox
®
Phaser
®
6022 Printer is ENERGY STAR
®
qualified under the ENERGY STAR
Program Requirements for Imaging Equipment.
The ENERGY
STAR and ENERGY STAR mark are registered United States trademarks.
The ENERGY
STAR Imaging Equipment Program is a team effort between United
States, European Union, and Japanese governments and the office equipment industry
to promote energy-efficient copiers, printers, fax, multifunction printers, personal
computers, and monitors. Reducing product energy consumption helps combat smog,
acid rain, and long-term changes to the climate by decreasing the emissions that result
from generating electricity.
Xerox
®
ENERGY STAR equipment is preset at the factory to switch to Power Saver modes after 2 minutes
from the last copy or print.
To Next Page
Loading...
Need help?
General
