Troubleshooting
112 Xerox
®
Phaser
®
6022 Printer
User Guide
Symptom Cause Solution
Stray black dots, white areas, or
dropouts
The paper is outside the
recommended specification
range.
Replace the paper with a recommended
size and type, and confirm that your
control panel and print driver settings are
correct. For details, see Supported Paper
on page 60.
The toner cartridges are not
Xerox
®
toner cartridges.
Replace the toner cartridges with
genuine Xerox
®
toner cartridges. For
details, see Consumables on page 91.
• Vertical black or color streaks
or multiple colored streaks or
lines
• Streaks in one color only
The toner cartridges are not
Xerox
®
toner cartridges.
Replace the toner cartridges with
genuine Xerox
®
toner cartridges. For
details, see Consumables on page 91.
There is a problem with the
toner cartridge for that color.
Check the condition of the toner
cartridge and replace it if necessary. For
assistance, go to the Xerox
®
Support
website at
www.xerox.com/office/6022support.
Color around the edge of
printing is incorrect
The color registration is
incorrect.
Adjust the color registration. For details,
see Color Registration on page 88.
Partial blanks, creased paper, or
blotted printing
The paper is damp. Replace the paper.
The paper is outside the
recommended specification
range.
Replace the paper with a recommended
size and type, and confirm that your
control panel and print driver settings are
correct. For details, see Supported Paper
on page 60.
The printer is worn or damaged. For assistance, go to the Xerox
Support
website at
www.xerox.com/office/6022support.
The toner cartridges are not
Xerox
®
toner cartridges.
Replace the toner cartridges with
genuine Xerox
®
toner cartridges. For
details, see Consumables on page 91.
To Next Page
Loading...
Need help?
General
