Xerox Phaser 6600 User Manual

Maintenance
Phaser 6600 Color Printer 129
User Guide
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Select Adjust Paper Type, then press OK.
5. Select Plain or Label, then press OK.
6. Select Lightweight or Heavyweight, then press OK.
7. To return to Service Tools, press the Back arrow button, or to return to the main menu, press the
Menu button.
Adjusting the Transfer Belt Unit
Adjust Transfer Belt Unit allows you to improve print quality for selected paper types.
To adjust the transfer belt unit:
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Navigate to Adjust Transfer Belt, then press OK.
5. At Adjust TransBelt, K Offset, press OK.
6. At K Offset, to increase or decrease the value, use the Up and Down arrow buttons, then press
OK.
7. Press the Back arrow button.
8. At Adjust TransBelt, navigate to YMC Offset, then press OK.
9. At YMC Offset, to increase or decrease the values, use the Up and Down arrow buttons, then
press OK.
10. To return to Service Tools, press the Back arrow button, or to return to the main menu, press the
Menu button.
Adjusting the Transfer Roller
Use Adjust Transfer Roller to specify the bias transfer roller voltage for printing on the selected paper
type. If the printed image is too light, increase the offset for the paper you are using. If the printed
image is mottled or blotchy-looking, decrease the offset for the paper you are using.
To adjust the transfer roller:

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm