Maintenance
132 Phaser 6600 Color Printer
User Guide
Clearing Job History
The printer retains information on previous printing jobs, including the date, time, job type, document
name, output color, paper size, number of pages, and results. The status of a maximum of 20 jobs
prints on the Job History Report. Use Clear Job History to clear all jobs from the list.
To clear job history:
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Navigate to Clear Job History, then press OK.
5. At the Are you sure? prompt, press the Up or Down arrows to select Yes, then press OK.
6. To return to Service Tools, press the Back arrow button, or to return to the main menu, press the
Menu button.
Adjusting the Altitude
Use Adjust Altitude to adjust the altitude to match that of the location where the printer is installed. If
the altitude setting is incorrect, it can cause print-quality problems.
To adjust the altitude:
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Select Adjust Altitude, then press OK.
5. To select the altitude of the location of the printer, press the arrow buttons, then press OK.
6. To return to Service Tools, press the Back arrow button, or to return to the main menu, press the
Menu button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
