Installation and Setup
Phaser 6600 Color Printer 31
User Guide
Selecting a Location for the Printer
1. Select a dust-free area with temperatures from 10–32°C (50–90°F), and relative humidity
15–85%.
Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room can
cause condensation inside the printer, directly interfering with image transfer.
2. Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of
the printer. The printer must be horizontal with all four feet in solid contact with the surface. To
find the weight for your printer configuration, see Physical Specifications on page 171.
After positioning the printer, you are ready to connect it to the power source and computer or
network.
See also:
Total Space Requirements on page 172
Clearance Requirements on page 172
To Next Page
Loading...
