Installation and Setup
38 Phaser 6600 Color Printer
User Guide
To record the network information from the wireless router or access point:
1. On your computer, use your Web browser to open the control panel for the wireless router.
2. Click Wireless Settings.
3. Record the following information. The network name and passphrase are case sensitive.
Ensure that you record them exactly as they appear in the wireless router control panel.
• Name (SSID)
• Security Options (Encryption Type)
• Passphrase
Note: The wireless router must be connected and properly configured for the network before you
install the printer. For details, see your router documentation.
Connecting to a Wireless Network Using the Control Panel Wi-Fi Setup Wizard
Before you begin, ensure that you have the wireless network Service Set Identifier (SSID),
encryption type, and passphrase. For details, see Collecting Wireless Network Information for
Connecting to a Wireless Network Manually on page 37.
To connect to a wireless network using the Wi-Fi Setup Wizard:
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Network Setup, then press OK.
4. Navigate to Wi-Fi Setup, then press OK.
5. Select the desired network from the list, then press OK.
Note: If the wireless network does not appear in the list, see Connecting to a Wireless Network
Manually on page 38.
6. Enter the passcode for the selected network, then press OK.
7. Turn off the printer, then turn it on again.
8. To view the new IP address and ensure that the connection is successful, print a Configuration
Report.
Connecting to a Wireless Network Manually
Before you begin, ensure that you have the wireless network Service Set Identifier (SSID),
encryption type, and passphrase. For details, see Collecting Wireless Network Information for
Connecting to a Wireless Network Manually on page 37.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
