Xerox Phaser 6700DN User Manual

Installation and Setup
24 Phaser 6700 Color Printer
User Guide
Installation and Setup Overview
Before printing, your computer and the printer must be plugged in, turned on, and connected. Configure
the initial settings of the printer, then install the driver software and utilities on your computer.
You can connect to your printer over a network using an Ethernet cable, or directly to your computer using
a USB cable. Hardware and cabling requirements vary for the different connection methods. Routers,
network hubs, network switches, modems, Ethernet, and USB cables are not included with your printer
and must be purchased separately. Xerox recommends an Ethernet connection because it is typically
faster than a USB connection, and it provides access to CentreWare Internet Services.
For details on connection and network setup, print the Connection Setup page:
1. At the control panel, touch Printer.
2. On the Information tab, touch Print Reference Materials.
3. Touch Connection Setup.
4. Touch Print.
For details on configuring the printer settings, see the System Administrator Guide at
www.xerox.com/office/6700docs.
Physically Connecting the Printer to the Network
Use a Category 5 or better Ethernet cable to connect the printer to the network. An Ethernet network is
used for one or more computers and supports many printers and systems simultaneously. An Ethernet
connection provides direct access to printer settings using CentreWare Internet Services.
To connect the printer:
1. Connect the power cord to the printer, and plug the cord into an electrical outlet.
2. Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the printer.
Connect the other end of the Ethernet cable to a correctly configured network port on a hub
or router.
3. Turn on the printer.
Initial Printer Setup
Make sure that the printer is set up before installing the printer software. Setup includes enabling the
optional features and assigning an IP address for the Ethernet network connection. If the printer has not
been previously turned on and configured, see the System Administrator Guide at
www.xerox.com/office/6700docs.

Xerox Phaser 6700DN Specifications

General

Print technology	Laser printing
Storage temperature (T-T)	-4 - 104 °F
Operating temperature (T-T)	50 - 90 °F
Operating relative humidity (H-H)	10 - 85 %
PCL fonts	94
Product color	Beige, Navy
Country of origin	China
Maximum duty cycle	120000 pages per month
Number of PostScript fonts	173
Number of print cartridges	4
Page description languages	PCL 5e, PCL 6, PostScript 3
Total input capacity	700 sheets
Total output capacity	500 sheets
Maximum resolution	2400 x 1200 DPI
Time to first page (black, normal)	7 s
Time to first page (color, normal)	8 s
Print speed (black, normal quality, A4/US Letter)	47 ppm
Print speed (color, normal quality, A4/US Letter)	45 ppm
Maximum internal memory	2048 MB
Sound power level (standby)	26 dB
Maximum print size	216 x 356 mm
Paper tray media types	Card stock, Envelopes, Glossy paper, Heavy paper, Labels, Plain paper, Pre-Printed, Recycled paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Wi-Fi	-
Network ready	No
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Control type	Touch
Display diagonal	4.3 \
AC input frequency	50 - 60 Hz
Power consumption (standby)	116 W
Power consumption (printing)	637 W
Sustainability certificates	ENERGY STAR
Export Control Classification Number (ECCN)	EAR99

Weight and Dimensions

Depth	761.99 mm
Width	692.14 mm
Height	571.49 mm