Paper and Media
38 Phaser 6700 Color Printer
User Guide
2. Remove any paper that is a different size.
3. Move the length and width guides out:
a. Pinch the guide lever on each guide.
b. Slide the guides outward until they stop.
c. Release the levers.
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
5. Load the paper in the tray:
• For 1-sided printing, insert the paper with the print side face up and the bottom edge to
the right.
To Next Page
Loading...
