Troubleshooting
106 Phaser 7100 Color Printer
User Guide
• After loading the trays, select the correct paper type and size on the control panel.
• When printing, select the correct type and size in the print driver.
• Store paper in a dry location.
• Do not open sealed packages of paper until you are ready to load them into the printer.
• Leave stored paper in the original packaging. The paper wrapper protects the paper from moisture
loss or gain.
Avoid the following:
• Polyester coated paper that is specially designed for inkjet printers.
• Paper that is folded, wrinkled, or excessively curled.
• Loading more than one type, size, or weight of paper in a tray at the same time.
• Overfilling the trays.
• Allowing the output tray to overfill.
For a detailed list of supported paper, go to www.xerox.com/paper.
To Next Page
Loading...
