Maintenance
88 Phaser 7100 Color Printer
User Guide
Routine Maintenance Items
Routine maintenance items are printer parts that have a limited life and require periodic replacement.
Replacements can be parts or kits. Routine maintenance items are typically customer replaceable.
Note: Each routine maintenance item includes installation instructions.
Routine maintenance items for this printer include the following:
• Imaging Units (Cyan, Magenta, Yellow, and Black)
• Waste Cartridge
Customer Replaceable Units
Customer replaceable units (CRUs) are printer parts that can be replaced without need for technical
service intervention. These parts have longer rated lives than routine maintenance items.
Note: Each customer replaceable unit includes installation instructions.
Customer Replaceable Units for this printer include the following:
• 110 V Fuser
• 220 V Fuser
• Transfer Roller
• Tray 1 Feed Roller Kit
• Tray 2 Feed Roller Kit
• Bypass Tray Feed Roller
When to Order Supplies
A warning appears on the control panel when supplies near their replacement time. Verify that you have
replacements on hand. It is important to order these items when the messages first appear to avoid
interruptions to your printing. An error message appears on the control panel when supplies must be
replaced.
Order supplies from your local reseller or go to www.xerox.com/office/7100supplies.
CAUTION: Use of non-Xerox
®
supplies is not recommended. The Xerox
®
Warranty, Service
Agreement, and Total Satisfaction Guarantee do not cover damage, malfunction, or degradation of
performance caused by use of non-Xerox
®
supplies, or the use of Xerox
®
supplies not specified for this
printer. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage
could vary outside these areas. Please contact your Xerox representative for details.
To Next Page
Loading...
Need help?
General
