Xerox Phaser 7100 User Manual

Maintenance
82 Phaser 7100 Color Printer
User Guide
Adjustments and Maintenance Procedures
This section includes:
• Color Registration ............................................................................................................................................................ 82
• Adjusting Paper Type ..................................................................................................................................................... 83
• Adjusting the Voltage Offset ....................................................................................................................................... 84
• Adjusting the Fuser ......................................................................................................................................................... 84
• Adjusting the Altitude .................................................................................................................................................... 84
• Enabling Dew Prevention .............................................................................................................................................. 85
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is turned on. You
can also adjust color registration manually any time the printer is idle. You must adjust the color
registration any time the printer is moved. If you are having printing problems, adjust the color
registration.
Performing an Automatic Color Registration Adjustment
Automatic color registration adjustment occurs every time a new toner cartridge is installed. You can run
this adjustment at other times as needed.
To perform an automatic color registration adjustment:
1. At the printer control panel, press the Menu button.
2. Navigate to Admin Menu, then press OK.
3. Navigate to Image Quality, then press OK.
4. Navigate to Adjust Color Regi, then press OK.
5. Navigate to Auto Color Regi, then press OK.
6. To begin the calibration, at the prompt, press OK.
Performing a Manual Color Registration Adjustment
Color Registration adjusts the printer to make corrections to blurry or hazy prints, or prints with color
halos.
To perform a manual color registration adjustment:

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm