EasyManuals Logo

Xerox Phaser 7100 User Manual

Xerox Phaser 7100
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Safety
12 Phaser 7100 Color Printer
User Guide
Power Cord
Use the power cord supplied with your printer.
Plug the power cord directly into a properly grounded electrical outlet. Ensure that each end of the
cord is connected securely. If you do not know if an outlet is grounded, ask an electrician to check
the outlet.
Do not use a ground adapter plug to connect the printer to an electrical outlet that does not have a
ground connection terminal.
WARNING: Avoid the potential of electrical shock by ensuring that the printer is grounded properly.
Electrical products can be hazardous if misused.
Only use an extension cord or power strip designed to handle the electrical current capacity of the
printer.
Verify that the printer is plugged into an outlet that is providing the correct voltage and power.
Review the electrical specification of the printer with an electrician if necessary.
Do not place the printer in an area where people can step on the power cord.
Do not place objects on the power cord.
Replace the power cord if it becomes frayed or worn.
Do not unplug or plug the power cord while the printer is turned on.
To avoid electrical shock and damage to the cord, grasp the plug when unplugging the power cord.
The electrical outlet must be near the printer and must be easily accessible.
The power cord is attached to the printer as a plug-in device on the back of the printer. If it is necessary
to disconnect all electrical power from the printer, disconnect the power cord from the electrical outlet.
Printer Supplies
Use the supplies designed for your printer. The use of unsuitable materials can cause poor
performance and a possible safety hazard.
Follow all warnings and instructions marked on, or supplied with, the product, options, and supplies.
Store all consumables in accordance with the instructions given on the package or container.
Keep all consumables away from the reach of children.
Never throw toner, print/drum cartridges, or toner containers into an open flame.
When handling cartridges, for example toner and such, avoid skin or eye contact. Eye contact can
cause irritation and inflammation. Do not attempt to disassemble the cartridge, which can increase
the risk of skin or eye contact.
CAUTION: Use of non-Xerox
®
supplies is not recommended. The Xerox
®
Warranty, Service
Agreement, and Total Satisfaction Guarantee do not cover damage, malfunction, or degradation of
performance caused by use of non-Xerox
®
supplies, or the use of Xerox
®
supplies not specified for this
printer. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage
could vary outside these areas. Please contact your Xerox representative for details.

Table of Contents

Other manuals for Xerox Phaser 7100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 7100 and is the answer not in the manual?

Xerox Phaser 7100 Specifications

General IconGeneral
Maximum Print Resolution1200 x 1200 dpi
Monthly Duty CycleUp to 52, 000 pages
Processor667 MHz
Memory (Standard)256 MB
Paper Input Capacity (Maximum)2, 050 sheets
Paper Output Capacity250 sheets
Duplex PrintingAutomatic
TypeColor Laser Printer
Operating System CompatibilityWindows, Mac OS, Linux
ConnectivityUSB 2.0, Ethernet
Supported Media SizesA4, A5, B5, Letter, Legal
First Page Out (Black)9 seconds
First Page Out (Color)9 seconds
Print LanguagesPCL 6, PostScript 3
Network ConnectivityEthernet
Print SpeedUp to 30 ppm

Related product manuals