Installation and Setup
30 Phaser 7100 Color Printer
User Guide
Turning the Printer On and Off
To operate the printer, turn on the power switch.
To connect a cable or move the printer, turn off the power switch. Always turn off the printer using the
power switch, ensuring that the HDD control panel indicator is not on or blinking.
CAUTIONS:
• To prevent a printer malfunction or internal hard drive damage, ensure that the HDD
control panel indicator is off before turning off the power switch.
• Wait 10 seconds after the control panel goes dark before turning the power switch
back on.
•
Do not plug or unplug the power cord while the power switch is in the On position.
To Next Page
Loading...
Need help?
General