Specifications
Phaser 7100 Color Printer 127
User Guide
Performance Specifications
Print Quality
Print quality modes:
• Standard print-quality mode: 600 x 600 dpi
• Enhanced print-quality mode: 1200 x 1200 dpi
• Photo print-quality mode: 600 x 600 x 8 dpi
Note: The print resolutions are indicated for PostScript print drivers only. The only print quality
mode for PCL is Standard.
Print Speed
Print speeds for continuous printing are up to 30 ppm. Print speeds are the same for color or black and
white printing.
Several factors affect print speed:
• Print mode. The fastest print mode is Standard, followed by Photo, then Enhanced at half speed.
• Paper orientation. For faster print speeds, load paper long-edge feed. Loading paper short-edge
feed reduces print speeds.
• Paper size. Letter (8.5 x 11 in.) and A4 (210 x 297 mm) sizes share the fastest print speed. Larger
sizes reduce print speeds.
• Paper weight. Lightweight prints faster than heavier paper, such as Cardstock and Labels.
• Paper type. Plain prints faster than Glossy.
The maximum print speed for 1-sided printing is 30 ppm on Plain, Letter/A4 paper, oriented long-edge
feed.
The maximum print speed for 2-sided printing is 22 ppm on Plain, Letter/A4 paper, oriented long-edge
feed.
The slowest print speeds are 5 ppm for 2-sided printing on Glossy, and 2-sided printing on paper loaded
short-edge feed, which includes these sizes:
• Legal (216 x 356 mm, 8.5 x 14 in.)
• Tabloid (279 x 432 mm, 11 x 17 in.)
• B4 (250 x 353 mm, 9.9 x 13.9 in.)
• A3 (297 x 420 mm, 11.7 x 16.5 in.)
To Next Page
Loading...
Need help?
General
