Troubleshooting
Phaser 7100 Color Printer 99
User Guide
7. Close the tray.
Note: Paper trays extend out the rear of the printer. Ensure that the printer is not too close to the
wall to allow the tray to be inserted fully into the printer.
Clearing Jams at the Bypass Tray
To resolve the error displayed on the control panel you must clear all paper from the paper path.
WARNING: Internal parts of the printer can be hot. Use caution when doors and covers are open.
1. Remove any paper from the bypass tray.
2. Lift the Cover A Release Latch and open the cover.
To Next Page
Loading...
