Loading Paper
Loading Paper in the Bypass Tray
To load paper in the Bypass Tray:
1. Open the Bypass Tray. If the Bypass Tray is loaded with paper already, remove any
paper that is a different size or type.
2. Pull out the extension tray for larger sizes.
3. Move the width guides to the edges of the tray.
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a
level surface. This procedure separates any sheets that are stuck together and reduces
the possibility of jams.
Xerox
®
VersaLink
®
C505 Multifunction Printer6-6
User Guide
Paper and Media
To Next Page
Loading...
