3. Use a dry cotton swab to clean the color-density sensors.
4. Close the rear door.
Adjustmentsand MaintenanceProcedures
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is
enabled. You can also adjust color registration manually any time the printer is idle. You
must adjust the color registration any time the printer is moved. If you are havingprinting
problems, adjust the color registration.
Performing a Color Registration Adjustment
A color-registration adjustment occurs every time a new toner cartridge is installed. You
can run this adjustment at other times as needed.
To perform a color-registration adjustment:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Color Registration.
3. To perform an Automatic Color Registration adjustment, touch Start.
4. At the successfully completed prompt, touch Close.
5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.
7-11Xerox
®
VersaLink
®
C505 Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
