4. For the same tray, at the back of the printer, locate the jam-access door. Open the door, then
remove any jammed paper.
5. Re-insert the paper tray into the printer, then push the tray in until it stops.
Note: If the tray is extended for legal-size paper, the tray protrudes when it is inserted
into the printer. If removed in a previous step, replace the tray cover.
6. When paper trays are set to Fully Adjustable, you are prompted to verify or change the paper
settings.
a. To confirm the same paper size, type, or color, touch OK.
b. To select a new paper size, type, or color, touch the current setting, then select a new setting.
When finished, touch OK.
222
Xerox
®
VersaLink
®
C505 Color Multifunction Printer
User Guide
Troubleshooting
To Next Page
Loading...
Need help?
General
