8
Troubleshooting
General Troubleshooting
This section contains procedures to help you locate and resolve problems. Resolve some
problems by simply restarting the printer.
Printer Does Not Power On
SolutionsProbable Causes
At the printer control panel, press the
Power/Wake button. For details, refer to Power
Options.
The power switch is not turned on.
Power off the printer, then plug the power cord
securely into the outlet.
The power cord is not plugged into the outlet
correctly.
Power off the printer, then unplug the power
cord and wait 30 seconds. Plug the power cord
into the outlet securely, then press the
Power/Wake button.
The printer requires a full reset.
Plug another electrical appliance into the outlet,
then check if it operates properly.
Try a different outlet.
Something is wrong with the outlet connected
to the printer.
Use a power source with the specifications lis-
ted in the Electrical Specifications.
The printer is connected to an outlet with a
voltage or frequency that does not match the
printer specifications.
Caution
Plug the three-wire cord with grounding prong directly into a grounded AC outlet.
8-1Xerox
®
VersaLink
®
C505 Multifunction Printer
User Guide
To Next Page
Loading...
