Loading Labels in Tray 1
1. To remove the tray from the printer, pull out the tray until it stops. Lift the front of
the tray slightly, then pull it out.
2. Adjust the paper length and width guides.
3. Load the label sheets in the tray, face up.
Note
Do not load paper above the maximum fill line. Overfilling can cause paper jams.
4. Slide the tray back into the printer.
5. Push the tray in all the way.
6-25Xerox
®
VersaLink
®
C505 Multifunction Printer
User Guide
Paper and Media
To Next Page
Loading...
