3. Move the width guides to the edges of the tray.
4. Load sheet-labels in the Bypass Tray, face up, with the top edge of the page feeding
into the printer first.
5. Adjust the width guides until they touch the edges of the paper.
6. The printer prompts you to verify the size, type and color of the label sheets.
a) If the size, type and color are correct, touch OK.
b) If the size, type or color are incorrect, change the settings.
• To select a different size, touch the current size setting, then from the list,
select a size.
• To select the type, touch the current paper type, then from the list, select
Labels.
• To select the color, touch the current paper color, then from the list, select
a color.
c) To save the settings, touch OK.
Xerox
®
VersaLink
®
C505 Multifunction Printer6-24
User Guide
Paper and Media
To Next Page
Loading...
