8. Using a soft cloth moistened with water, wipe the mirrored glass, the white-plastic
strip, and the rollers. If dirt is difficult to remove, moisten a soft cloth with a small
amount of neutral detergent, then wipe the printer parts dry with a soft cloth.
Note
To prevent damage to the film around the glass, do not press heavily on the mirrored
glass.
9. Close the Second-Side Scanning Access Cover.
10. Close the Document Cover.
Xerox
®
VersaLink
®
C505 Multifunction Printer7-4
User Guide
Maintenance
To Next Page
Loading...
