9. Lift and carry the printer as shown in the illustration.
Note
• When moving the printer, do not tilt it more than 10 degrees in any direction.
Tilting the printer more than 10 degrees can cause toner spillage.
• Repack the printer and its options using the original packing material and boxes
or a Xerox Repackaging Kit.
• Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
®
Warranty, Service Agreement, or Total Satisfaction
Guarantee. The Xerox
®
Warranty, Service Agreement, or Total Satisfaction
Guarantee do not cover damage to the printer caused by improper moving.
After moving the printer:
1. Reinstall any parts that you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and power on the printer.
7-23Xerox
®
VersaLink
®
C505 Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
