4. For the same tray, at the back of the printer, locate the jam-access door. Open the
door, then remove any jammed paper.
5. Re-insert the paper tray into the printer, then push the tray in until it stops.
Note
If the tray is extended for legal-size paper, the tray protrudes when it is inserted into
the printer.
6. When paper trays are set to Fully Adjustable, you are prompted to verify or change
the paper settings.
a) To confirm the same paper size, type, or color, touch OK.
b) To select a new paper size, type, or color, touch the current setting, then select
a new setting. When finished, touch OK.
8-15Xerox
®
VersaLink
®
C505 Multifunction Printer
User Guide
Troubleshooting
To Next Page
Loading...
