8. Connect the printer to your computer with a USB cable or to a network using an
Ethernet cable.
9. Power on the printer.
Resetting Wireless Settings
If the printer was previously installed in a wireless network environment, it could retain
setup and configuration information. To prevent the printer from attempting to connect
to the previous network, reset the wireless settings.
To reset the wireless settings:
1. At the printer control panel, press the Home button.
2. Touch Device > Connectivity > Wi-Fi.
3. Touch the network selection that you want to reset.
4. Touch Forget This Network.
5. At the prompt, touch Forget & Reboot.
Xerox
®
VersaLink
®
C505 Multifunction Printer2-18
User Guide
Getting Started
To Next Page
Loading...
