3. Load your original documents.
• Use the document glass for single pages or paper that cannot be fed using the
single-pass duplex automatic document feeder. Lift the document feeder, then
place the original document face down in the upper-left corner of the document
glass.
• For single, multiple, or 2-sided pages, use the single-pass duplex automatic
document feeder. Remove any staples and paper clips from the pages. Insert the
original documents face up in the document feeder, with the top of the page
entering the feeder first. Adjust the paper guides so that they fit against the
documents.
4. Touch Fax.
5. To enter a recipient fax number, use the touch screen keypad, then touch Enter. To
add a number from the fax address book, touch the Address Book icon.
Note
To insert a pause as needed, touch the Special Characters icon, then touch Dial
Pause. To enter longer pauses, touch Dial Pause multiple times.
6. If scanning from 2-sided original documents, touch 2-Sided Scanning, then select
an option.
7. Adjust fax settings as needed.
For details about available features, refer to Apps Features.
8. Touch Send.
9. If you are scanning from the document glass, when prompted, do one of the following:
• To complete the job and return to the Fax app, touch Done.
Xerox
®
VersaLink
®
C505 Multifunction Printer4-36
User Guide
Xerox
®
Apps
To Next Page
Loading...
