b. Pull the imaging kit out slowly from the printer and take out the imaging kit by holding the handles on
both sides.
5. Remove the black imaging unit.
CCaauuttiioonn:: Do not expose the photoconductor unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
WWaarrnniinngg:: Do not touch the shiny photoconductor drum under the imaging unit. Doing so may affect the
quality of future print jobs.
6. Unpack the new imaging kit, and then remove the packing material.
Note: The imaging kit includes the imaging unit, cyan, magenta, and yellow developer units.
Xerox
®
VersaLink
®
C620 Color Printer User Guide 171
Maintenance
To Next Page
Loading...
Need help?
General