3. To release the feed roller, press both ends of the tab as shown and then remove it from the bypass tray.
4. Unpack and insert the new feed roller in the bypass tray.
5. Close the bypass tray.
6. Connect the power cord to the power supply, and then turn on the printer.
CCaauuttiioonn:: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated
and properly grounded electrical outlet that is near the product and easily accessible.
176
Xerox
®
VersaLink
®
C620 Color Printer User Guide
Maintenance
To Next Page
Loading...
Need help?
General