Xerox VersaLink C8000 User Manual

• For envelopes with a non-adhesive flap on a short edge, load the envelopes face up with the
flaps open, and flaps toward the right.
Note: Adjust the paper guides so that they rest lightly against the edges of the envelopes.
Ensure that the maximum fill line is visible or that there are no more than 50 envelopes
loaded in the tray.
3. Close the tray.
4. At the control panel, select the correct paper size, type, and color. Ensure that the paper type is
set to Envelope.
5. To confirm the settings, touch Confirm.
LLaabbeellss
You can print labels from any tray.
GGuuiiddeelliinneess ffoorr PPrriinnttiinngg LLaabbeellss
• Use labels designed for laser printing.
• Do not use vinyl labels.
• Do not feed a sheet of labels through the printer more than once.
• Do not use dry gum labels.
• Print only on one side of the sheet of labels. Use full-sheet labels only.
• Store unused labels flat in their original packaging. Leave the label sheets inside the original pack-
aging until ready to use. Return any unused label sheets to the original packaging and reseal it.
Xerox
®
VersaLink
®
C8000/C9000 Color Printer
User Guide
131
Paper and Media

Xerox VersaLink C8000 Specifications

General

Print Technology	Laser
Functions	Print
Print Speed (Color)	Up to 45 ppm
Print Resolution	1200 x 2400 dpi
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Memory	2 GB
Duplex Printing	Automatic
Control Panel	5-inch color touchscreen
Operating System Compatibility	Windows, macOS, Linux
Print Speed	Up to 45 ppm
Media Sizes Supported	A4, A5, B5
Media Types	Plain, Recycled, Bond, Cardstock, Labels, Envelopes
Connectivity	Ethernet, USB 3.0, NFC
Hard Drive	320 GB