Xerox VersaLink C8000 User Manual

7. Slide the tray back into the printer.
8. At the control panel, select the correct paper size, type, and color. Ensure that the paper type is
set to Labels.
Note: To change the paper settings when the tray is set to Dedicated mode, refer to
Configuring Tray Settings.
9. To confirm the settings, touch OK.
10. To return to the Home screen, press the Home button.
LLooaaddiinngg LLaabbeellss iinn TTrraayyss 33 aanndd 44 ooff tthhee TTaannddeemm TTrraayy MMoodduullee
1. Pull out Tray 3 or Tray 4 until it stops. Wait for the tray to lower and stop.
Note: Ensure that labels are the correct size for the tray. Do not load custom-size paper
into Trays 3 or 4. To change the paper size in Trays 3 and 4, refer to Configuring Trays 3
and 4 of the Tandem Tray Module.
2. To load labels in the tray, insert labels face up with the top edge toward the back. Stack the labels
against the left-rear corner of the tray as shown.
3. Slide the tray back into the printer.
4. At the control panel, select the correct paper type and color. Ensure that the paper type is set to
Labels.
5. To confirm the settings, touch OK.
6. To return to the Home screen, press the Home button.
134
Xerox
®
VersaLink
®
C8000/C9000 Color Printer
User Guide
Paper and Media

Xerox VersaLink C8000 Specifications

General

Print Technology	Laser
Functions	Print
Print Speed (Color)	Up to 45 ppm
Print Resolution	1200 x 2400 dpi
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Memory	2 GB
Duplex Printing	Automatic
Control Panel	5-inch color touchscreen
Operating System Compatibility	Windows, macOS, Linux
Print Speed	Up to 45 ppm
Media Sizes Supported	A4, A5, B5
Media Types	Plain, Recycled, Bond, Cardstock, Labels, Envelopes
Connectivity	Ethernet, USB 3.0, NFC
Hard Drive	320 GB