Xerox VersaLink C9000

Emptying the Hole Punch Waste Container in the Business Ready Finisher
Caution: Do not perform this procedure when the printer is copying or printing.
1. Open the front door of the Business Ready Finisher.
2. Remove the hole-punch waste container, labeled R4, from its slot near the top left of the finisher.
Note:
• When you remove the hole-punch waste container, wait 10 seconds before you reinsert
it into the printer. The hole-punch counter resets after 10 seconds.
• If you remove the hole-punch waste container before the device instructs you to, empty
the container before you reinsert it into the finisher.
3. Empty the container.
170
Xerox
®
VersaLink
®
C8000/C9000 Color Printer
User Guide
Maintenance