June 2014
2-16
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
20-600 , 20-700
Status Indicator RAPs
20-600 No Answer Fault
The printer unable to connect to remote machine after maximum redial attempts.
BSD-Reference:
Procedure
Ensure that remote machine is powered on and reattempt submission.
20-700 Number Not Assigned Fault
The speed dial location used has no number assigned to it.
BSD-Reference:
Procedure
Dial the number manually or assign the number to the speed dial location.
Refer to Section 8: Address Book, Using Address Book from the Control Panel in the Xerox®
Phaser® 3025 User Guide on assigning speed dial numbers.
To Next Page
Loading...
